Zero-X Gimbals - A safety guide for your gimbal
Modified on: Mon, 7 Jul, 2025 at 9:08 AM
- Do not drop, crush, pierce or bend the gimbal as it may damage and cause it to malfunction.
- The gimbal is not water-resistant.
- Do not use any liquid cleansers to clean it. Use only a soft dry cloth to wipe clean the gimbal.
- Ensure that nothing is obstructing the gimbal when it is in operation.
- Keep the gimbal away from sand and dust to safeguard the sensors in the motor.
- Only recharge the gimbal with the supplied USB cable.
- If you are using a wall charger, ensure that it is a certified product in your region with an AC input of 240V 50/60Hz and a 5V output.
- Do not use the gimbal in temperatures above 55°C.
- Please do not disassemble the stabiliser
- If the motor works continuously for a long time, its surface temperature may grow hot. It's suggested unit is turned off to allow for cooling.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article