Installing the battery:

1. Ensure that the battery is fully charged
2. Insert the battery into the rear of the drone with correct orientation

Installing a Micro-SD card:

The Micro-SD card slot is on the bottom right side of the drone

1. Turn the drone upside down and insert Micro-SD card with correct orientation
2. Gently press in until you hear a click

Remove protective Gimbal case:

1. With the drone upside down, gently pull the protective cover away from the body of the gimbal
2. This can be placed back on once you are done flying

Unfolding the drone:

1. Bring out the arms of the drone to prepare its flight
2. These arms can be folded back in once you are done flying for compact storage

Prepare remote control:

1. Charge the remote control to full battery with the cable provided
2. The power light on the remote control will green once charging is complete.

Pairing your remote control and drone:

1. Adjust the antennas on the top of the remote to the fully extended position
2. Hold down the power button on your drone for 3 seconds, and wait for it to start blinking blue indicating that it needs to be paired
3. Turn on the remote control by pressing the button. Move the left thumb stick upwards for 1 second then move the left thumb stick downward for 1 second.  
4. The remote control will beep and the lights on arms of Drone will slowly blink alternately in blue between the front and rear. It means the remote control and the Drone have been paired successfully. 

Settings up the Vision app:

1. Go into you Apple app store or Google play store and search for "Zero-X Ascend", and install the app
2. Connect the app and then go into your smartphone Wi-Fi settings and select your drone's internet connect.
3. Once connected, open the Evolved 4K app.
4. If successfully paired, you should be able to view live feed and take control of your drone and its camera from your phone.

Pre-flight checklist:

• Check your drone, controller and device are fully charged
• All blades are installed correctly
• All arms are fully unfolded
• Camera lens is clean and free of dirt
• All parts used are genuine Zero-X Pulsar+ products