Please follow these instructions before following the guide:

• DO NOT touch the throttle or steering until after stated in the instructions
• Make sure that instructions are followed and controller is always turned on first
• When pairing frequencies between the car and the remote, make sure that it is only between these two items. Otherwise, the frequency pairing will be unsuccessful

Follow this guide below to start pairing the controller and RC car:

1. Make sure that your RC car and remote control have full charge
2. Turn on the remote control
3. Turn on the car and look to make sure that the LED is blinking red
4. Wait for the blinking red to turn into a constant red
5. Assemble the top shell to the car
6. The LED on the remote should also turn into a constant red when the car and remote have paired.
7. You can now use the controller

If you have had any trouble in this process, please refer to your product manual or contact support.