Here is a guide to setting up your drone.

Installing the battery:

1. Ensure that the battery is fully charged
2. Insert the battery into the middle of the drone with correct orientation
3. Slide the battery all the way down until is securely slots into place

Installing a Micro-SD card:

The Micro-SD card slot is on the bottom left side of the drone

1. Turn the drone upside down and insert Micro-SD card with correct orientation
2. Gently press in until you hear a click

Remove protective Gimbal case:

1. With the drone upside down, gently pull the protective cover away from the body of the gimbal
2. This can be placed back on once you are done flying

Unfolding the drone:

1. Bring out the arms of the drone to prepare its flight
2. These arms can be folded back in once you are done flying for compact storage

Prepare remote control:

1. Put two fully charged AA batteries into the remote control
2. Pull out the arms of the remote controller

Pairing your remote control and drone:

1. Hold down the lock button and swipe the power ON button to the right to turn on the controller
2. On your drone, press down the button on the top of the battery for at least 3 seconds and wait for the drone to make a sound and activate 4 lights in sequence
3. Wait for a sequence of lights on the drone to end in flashing yellow, which should allow the controller to automatically pair with the drone. This should be indicated by the controller LCD screen displaying drone stats such as battery life.

Settings up the Evolved4K app:

1. Go into you Apple app store or Google play store and search for "Evolved 4K", and install the app
2. Connect the app and then go into your smartphone Wi-Fi settings and select your drone's internet connect.
3. Once connected, open the Evolved 4K app.
4. If successfully paired, you should be able to view live feed and take control of your drone and its camera from your phone.

Pre-flight checklist:

• Check your drone, controller and device are fully charged
• All blades are installed correctly
• All arms are fully unfolded
• Camera lens is clean and free of dirt
• All parts used are genuine Zero-X Pulsar+ products