Installing the battery:

1. Ensure that the battery is fully charged.
2. Insert the battery into the rear of the Drone in the right direction.
3. Slide the battery all the way in, until it securely slots into place 

Installing a Micro-SD card:

The Micro SD Card slot is at the bottom right side of the Drone.

1. Slide the Micro SD Card into the slot at the right side of the Drone with the Micro SD Card copper contacts facing toward the Drone. Gently press the card in, until you hear the lock 'click' into place

Prepare remote control:

1. Charge the remote control to full battery with the cable provided
2. The power light on the remote control will green once charging is complete.

Settings up the Zero-X Levion app:

1. Go into you Apple app store or Google play store and search for "ZXP-ASC", and install the app
2. Connect the app and then go into your smartphone Wi-Fi settings and select your drone's internet connect.
3. Once connected, open the app.
4. If successfully paired, you should be able to view live feed and take control of your drone and its camera from your phone.

Pairing your remote control and drone:

1. Adjust the antennas on the top of the remote to the fully extended position
2. Hold down the power button on your drone for 3 seconds, and wait for it to start blinking blue indicating that it needs to be paired
3. Turn on the remote control by pressing the button. Move the left thumb stick upwards for 1 second then move the left thumb stick downward for 1 second.  
4. The remote control will beep and the lights on arms of Drone will slowly blink alternately in blue between the front and rear. It means the remote control and the Drone have been paired successfully.